Chilli Rare Bird


innerhalb 2-3 Tagen lieferbar

959,00

Preis inkl. MwSt., zzgl. Versand

Chilli Rare Bird ist eigentlich die Weiterentwicklung des Tucan und Liebling Shapes von Mitch Coleborn. Beim Rare Bird hat Chilli die Länge des Tucan etwas gekürzt und die breiteste Stelle etwas nach vorne versetzt aber die Unterwasserlinie, Rocker und Bottom des Tucan übernommen. So fällt das Rare Bird etwas breiter aus, ist deshalb angleitfreudiger und deshalb kann man das Rare Bird 1-2 Inches kürzer surfen als das Tucan. Das quirlige, schnelle und drehfreudige Rare Bird ist das perfekte Board für kleine bis kopfhohe Wellen. Die Option Thruster oder Quad erlaubt dazu noch eine super Abstimmung auf die Wellenbedingungen. 

Bei der 50 / 50 Technologie werden die neuesten EPS / Epoxy Materialen verwendet und der  EPS Kern wird High Grade Fiberglas und Carbon Fiber Frame geglasst, mit dem Zweck einen parabolischen Carbon Rahmen zu designen. In Kombination mit dem Carbon Stringer erzeugt diesen einen kontrollierten Flex. Der Carbon Stringer ermöglicht es dem Surfer, Geschwindigkeit zu erzeugen, während der parabolische Rahmen auf dem Deck die Flex Drehung durch die vorderen zwei Drittel des Surfbretts kontrolliert. Dadurch ist das Board leicht zu kontrollieren und ermöglicht euch gleichzeitig maximalen Speed zu kreieren. 

 

Damit ihr für eure Wünsche und euer Surfkönnen das passende Board bekommt, ist es besser ihr fragt kurz bei uns an und gebt uns ein paar Infos über euer Surfkönnen, eure Erwartungen und eure Köpermaße.

 

DIMENSIONS Chilli Rare Bird XF
LENGTH WIDTH THICK VOLUME FINS APPROX WEIGHT RANGE

5.6 x 19 1/4 x 2 1/4 
Volume: 25 Lit 

5.7 x 19 3/8 x 2 5/16 
Volume: 27 Lit 

5.8 x 19 1/2 x 2 3/8 
Volume: 28 Lit 

5.9 x 19 5/8 x 2 7/16 
Volume: 29 Lit 

5.10 x 19 3/4 x 2 1/2 
Volume: 30 Lit 

5.11 x 19 7/8 x 2 1/2 
Volume: 31 Lit 

6.0 x 20 x 2 5/8 
Volume: 32 Lit 

 

Lieferumfang: Board ohne Finnen, FCS II System, empfohlene Finne FCS II Reactor

 

App

 

XF-TECH 

Built using the latest in EPS/Epoxy materials; the XF technology combines a lightweight EPS core with Biaxial fibreglass cloth and Epoxy resin. All XF boards are constructed using a 36gram EPS core with a high-grade timber stringer, each board is hand laminated using epoxy resign and biaxial fibreglass on the deck providing a lighter, stronger board that feels fast and responsive under your feet increasing performance in a wide variety of conditions! 
- Biaxial Fibre Glass has about half of its fibres aligned along the length of the cloth (0 degrees) and about half across the cloth (90 degrees) lending itself as a perfect option for creating a controlled flex pattern. 
- Expanded Polystyrene (EPS) foam is a version of polystyrene foam typically found in the core of Firewire surfboards. EPS is typically the lightest of the three foams used in surfboard construction resulting in a much lighter board translating to increased buoyancy and floatation. Basically the lowest density or lightest board will float you the best! The advantage of better buoyancy is added paddling speed and increased manoeuvrability allowing you to ride a smaller board. EPS foam core is also less likely to deteriorate over time! 
- Epoxy resin is a healthier alternative to polyester as epoxy emits 50-75% fewer VOCs (volatile organic compounds) than polyester resin, which means a decrease in harmful chemicals in the shop and the environment in general. In fact, epoxy is a common household item, safe to use without a mask and with only moderate ventilation. Epoxy is lighter than polyester. Under most circumstances, resin makes up a large part of a completed board’s overall weight. Not only is epoxy lighter than polyester, but less is needed per coat. This ends up meaning a lighter surfboard, a big plus for most surfers. The biggest bonus However is the durability and strength of epoxy resin.

 

 

 

Zu diesem Produkt empfehlen wir

*

Preise inkl. MwSt., zzgl. Versand